Line Embossed Envelope Seal

Check out how the Brother Embossing Starter Kit is used to make this elegant envelope seal.

You will need: Gold or silver sticker paper, ScanNCut DX, Embossing Starter Kit, low-tack adhesive mat

  1. You’ll need to make sure the embossing function is activated on your machine and CanvasWorkspace.
  2. Place the embossing mat on the machine (following all kit directions).
  3. Place the sticker paper face down on the mat (backing should be facing you).
  4. Place the 1.5 mm embossing tool into the holder.
  5. Load Step 1 .fcm file into the machine.
  6. Use the scanning function in the machine to scan the material. Make sure that the pattern is aligned on top of the material.
  7. Select “emboss” in the menu, and press start.
  8. Once the embossing is finished, remove the sticker sheet from the embossing mat and attach it to the low-tack mat. Align the sheet to the same part of the mat as you did before.
  9. Load Step 2 .fcm file into the machine. Use the scanning function to make sure the cut pattern aligns with where you embossed earlier.
  10. Cut the sticker pattern out.
  11. Done!